Compare the configuration.
Then discuss the fit.
These are reference specifications, grouped by equipment family. The models serve different packaging processes; a larger number does not establish a better fit.
Blister packaging machines
Bring the product, forming material and lid together in a pack designed for your application. Start with the cavity drawing and sealing requirements.
| Model & process | Reference process values | Installation | Next step |
|---|---|---|---|
| DPB-80A Compact blister packaging machine | Cutting cycle: 10-35 cycles/min Forming size and depth: 70 × 110 × 26 mm Compressed air pressure: 0.6-0.8 MPa | Total power: 3.0 kW Main motor power: 0.75 kW Overall dimensions: 1500 × 600 × 1200 mm Machine weight: 450 kg | Request a proposal |
| DPK-260H Alu/PVC and Alu/Alu blister packaging machine | Cutting cycle, Alu/PVC: 25-60 cycles/min Cutting cycle, Alu/Alu: 20-30 cycles/min Maximum forming depth, Alu/PVC: 22 mm | Total power: 8.5 kW Overall dimensions: 3500 × 760 × 1620 mm Machine weight: 1650 kg | Request a proposal |
| DPP-250 Flat-plate blister packaging machine | Cutting cycle: 6-50 cycles/min Forming area: 240 × 150 mm Forming depth: 14 mm standard; 26 mm maximum | Total power: 6.2 kW Main motor power: 1.5 kW Overall dimensions: 3000 × 730 × 1600 mm Machine weight: 1600 kg | Request a proposal |
Snap-open packaging machines
Give liquids and pastes a compact card format that opens by folding. Coordinate the fill, printed films and opening geometry before selecting a machine.
| Model & process | Reference process values | Installation | Next step |
|---|---|---|---|
| KP-4 Snap-open card packaging machine | Operating cycle: 22-28 cycles/min Sealing lanes: 4 lanes Power supply: Three-phase 380 V 50 Hz-60 Hz | Total power: 11 kW Overall dimensions: 2350 × 1000 × 1600 mm Machine weight: 1600 kg | Request a proposal |
Single-dose filling machines
A single-dose project starts with the formulation and the pack. Define the fill volume, flow behavior and opening format together to narrow the equipment requirements.
| Model & process | Reference process values | Installation | Next step |
|---|---|---|---|
| GF-120P2 2-head single-dose form-fill-seal machine | Filling heads: 2 Maximum forming depth: 12 mm Maximum forming plate: 100 × 65 mm | Installed power: 4.3 kW Machine weight: 700 kg Overall dimensions: 1750 × 750 × 1400 mm | Request a proposal |
| GF-120P5 5-head single-dose form-fill-seal machine | Filling heads: 5 Maximum forming depth: 12 mm Maximum forming plate: 110 × 120 mm | Installed power: 7 kW Machine weight: 900 kg Overall dimensions: 2300 × 850 × 1400 mm | Request a proposal |
Cycle rate, head count and cavity size cannot be converted into comparable finished output without the product, tooling and material conditions. Read the output comparison guide.
Specifying an eye patch process?
Start with the patch format and gel behavior, then define the filling, cooling and sealing requirements.
Prepare your eye patch project briefStart with your product.
Build the right packaging brief.
Share the formulation, pack format and output you have in mind.