250 mm packaging web
The DPP-250 column specifies 250 mm wide PVC film and PTP foil.
BLISTER PACKAGING
LEIMAI DPP-250
Flat-plate blister packaging machine
The DPP-250 is a flat-plate blister packaging machine for solid products. The reference configuration uses a 250 mm packaging web, with forming dimensions and utilities listed specifically for the DPP-250.
- Cutting cycle
- 6-50 cycles/min
- Forming area
- 240 × 150 mm
Manufacturer reference configuration. Agree the final specification against your product, packaging materials and installation requirements.
Match the machine
to your product.
The LEIMAI DPP-250 is a flat-plate blister packaging machine from Guangzhou Leimai Machinery Equipment Co., Ltd. Solid-product blister packaging with a product-specific feeder and cavity design.
Defined forming envelope
The reference forming size is 240 × 150 mm, with 14 mm standard depth and 26 mm maximum depth.
Configuration-specific utilities
Use the DPP-250 utility values when planning the installation, then confirm the final electrical arrangement.
01
Form the cavities
02
Load the products
03
Heat-seal and cut
DPP-250
technical specifications
Reference values for the listed configuration. Keep the product, pack and utilities together when comparing machines.
Download the specification table| Specification | Value |
|---|---|
| Cutting cycle | 6-50 cycles/min |
| Forming area | 240 × 150 mm |
| Forming depth | 14 mm standard; 26 mm maximum |
| Stroke range | 40-160 mm |
| Compressed air pressure | 0.4-0.6 MPa |
| Compressed air consumption | ≥0.35 m³/min |
| Total power | 6.2 kW |
| Main motor power | 1.5 kW |
| PVC film | 0.25-0.5 mm thickness × 250 mm width |
| PTP foil | 0.02-0.035 mm thickness × 250 mm width |
| Overall dimensions | 3000 × 730 × 1600 mm |
| Machine weight | 1600 kg |
Tooling and product dimensions determine the finished-pack layout.
Other configurations can have different dimensions and utility requirements.
Make your proposal
specific to the job.
Send these details with your DPP-250 inquiry.
Request a proposal- 01Product and formulation or item dimensions
- 02Dose or cavity drawing and opening format
- 03Film and lidding material specifications
- 04Target finished output and planned working hours
- 05Destination country, electrical supply and utilities
DPP-250
buyer questions
What is the DPP-250 used for?
Solid-product blister packaging with a product-specific feeder and cavity design.
What determines the finished output?
The product, pack geometry, number of packs per cycle and filling or feeding conditions determine usable output. Evaluate the agreed format using representative materials.
What should I include in a DPP-250 inquiry?
Send the product information, pack drawing, material specification, target output and installation country. Include the available electrical supply and utilities.
Technical content reviewed: . Reference: LEIMAI manufacturer technical listing (source page date: 2021-04-26). Final configuration is defined in the agreed equipment specification.
Continue your comparison.
Compare equipmentDPB-80A
Compact blister packaging machine
The DPB-80A is a compact blister packaging machine for solid products such as tablets and capsules. Its documented configuration combines programmable control, adjustable operation and forming, sealing and cutting.
- Cutting cycle
- 10-35 cycles/min
- Forming size and depth
- 70 × 110 × 26 mm
- Compressed air pressure
- 0.6-0.8 MPa
DPK-260H
Alu/PVC and Alu/Alu blister packaging machine
The DPK-260H supports aluminium-plastic and aluminium-aluminium blister packaging. Its reference specification separates the cutting cycle and forming depth for the two pack constructions.
- Cutting cycle, Alu/PVC
- 25-60 cycles/min
- Cutting cycle, Alu/Alu
- 20-30 cycles/min
- Maximum forming depth, Alu/PVC
- 22 mm
Start with your product.
Build the right packaging brief.
Share the formulation, pack format and output you have in mind.
DPP-250Request a proposal