PACKAGING EQUIPMENT

Single-dose filling machines

A single-dose project starts with the formulation and the pack. Define the fill volume, flow behavior and opening format together to narrow the equipment requirements.

Request a proposal

Match the fill to the formulation.

Liquids
Pastes
Portion packs

Models and specifications

Compare models

GF-120P2

2-head single-dose form-fill-seal machine

The GF-120P2 combines plastic forming, liquid filling and pack finishing with 2 filling heads. It is intended for small liquid packs, with the formulation and packaging material specified together.

Filling heads: 2
Maximum forming depth: 12 mm
Maximum forming plate: 100 × 65 mm

View specifications

GF-120P5

5-head single-dose form-fill-seal machine

The GF-120P5 combines plastic forming, liquid filling and pack finishing with 5 filling heads. It is intended for small liquid packs, with the formulation and packaging material specified together.

Filling heads: 5
Maximum forming depth: 12 mm
Maximum forming plate: 110 × 120 mm

View specifications

Define the process.

Define the dose

Select the pack format

Specify the filling conditions

Bring these details
to your equipment inquiry.

What are the nominal dose and acceptable fill variation?
Does the formulation foam, settle or require heating?
Is the pack a formed cavity, card pack or another format?

Start with your product.
Build the right packaging brief.

Share the formulation, pack format and output you have in mind.